MONACO AUTO · FREE AUTOMOTIVE TOOLS

Wheel Offset & Spacer Calculator

Compare wheel width, offset and spacers. Calculate how far your new wheels move outward and estimate the spacer thickness for a measured fender gap.

Enter your setup

Current wheels
Proposed wheels & spacers

How to estimate a flush wheel fitment

Enter your current wheel width and offset, then the new setup. With the car parked safely, record your current outer wheel-edge to fender gap in millimetres. A zero remaining gap means the calculated wheel edge reaches your measured target. Front and rear axles often need separate calculations.

Wheel offset and spacer example

An 8-inch ET35 wheel with a 10 mm spacer becomes effectively ET25. Its outer edge moves 10 mm outward and its inner edge gains 10 mm of clearance. Changing to a 9-inch ET35 wheel moves each edge 12.7 mm outward from the wheel centre: the outer edge moves out, while inner clearance decreases.

Check these before choosing a spacer

Check tire sidewall shape, steering and suspension travel, camber, brake clearance, hub bore, bolt pattern, mounting hardware and hub engagement with a qualified installer. This tool compares nominal wheel geometry. It cannot establish roadworthiness or recommend a safe spacer solely from a fender measurement.

Wheel offset & spacer questions

Does a spacer change wheel offset?

It reduces effective positive offset by its thickness. A 5 mm spacer turns ET35 into effective ET30.

Can a spacer fix a wheel that already sticks out?

No. Adding a spacer moves the wheel farther outward. Review the wheel width and offset instead.

Does a zero fender gap guarantee no rubbing?

No. Tire dimensions, body movement, suspension compression and steering can change clearances. Confirm the complete setup with an installer.