Monaco tools
Tire size comparison & stretch calculator
Compare two tire sizes for diameter, sidewall height and speedometer difference, then explore tire width against wheel width.
Nominal dimensions. Actual tire dimensions vary by model. Check load rating, clearance and the vehicle’s requirements before changing sizes. Speed estimate assumes the speedometer is calibrated to the current tire size.
Compare nominal tire section width with wheel bead-seat width. The drawing is a dimension sketch, not a prediction of the mounted sidewall.
Section width changes with rim width and tire construction. This tool does not approve a stretch setup. Use the exact tire manufacturer’s specifications.
How to use the tire size calculator
Enter your current and proposed tire sizes using the width, aspect ratio and rim diameter printed on the sidewall. For 225/45R18, enter 225 mm, 45% and 18 inches. The size comparison shows nominal diameter, circumference, sidewall height and estimated speedometer difference.
What changes when you change tire size?
A larger rolling diameter travels farther per revolution. The speed estimate compares the new diameter with the current diameter; it assumes the speedometer was calibrated to the current size. Radius change is half the diameter difference and helps you assess the change in clearance.
Tire stretch and wheel width
Use the Tire stretch tab to compare nominal tire width with wheel width. Enter the tire manufacturer’s approved rim-width range when available. The diagram is an illustration, not a prediction of the mounted tire shape. Check the specific tire’s specifications, load rating and clearance before choosing a setup.